coty pool, connecticut,
liner replacement, pool renovations,
pool opening, closing winterization,
pool repair, pool, service, salt water chlorine
generation, salt, chlorination, new pool
equipment, solar pool heat,
leak detection
Click our links to learn more  
about  some  of  the premier
services we provide



pool liner replacements




salt chlorine generation




solar pool heating
swimming pool company
connecticut
Licensed & Insured
Lebanon, CT
"Cut down on
heating costs with
Solar Heating!"
Extenda Swim Wood Heaters

















  • For Pool up to 15,000
    gallons

  • Single Layer Stainless
    Steel Heat Exchanger     
    (60 total feet of pipe,
    handles up to 65-70
    GPM)

  • Comes with a 24" long,
    8" diameter chimney
    pipe, cap & magnetic
    thermometer.

  • Average BTU output
    70,000 to 80,000    
    (Adding wood every 75-
    90 minutes)

  • Measures 21" high x
    20" wide x 33" long and
    weighs 265 lbs.    
    (Heater stands 4.5' feet
    tall at top of cap)

  • Inside of fire box
    measures 28" deep 17"
    wide and 14.5" tall.

  • Can heat an 8,000
    gallon pool by 1.0 full
    degree per hour, with a
  • Painted with heavy duty
    exterior Hi-Temp glossy
    black powder coat paint.

  • Capable of increasing
    the water temp from 55
    to 85 degrees in 2-3
    days on a 8,000 to
    15,000 gallon pool.
    (While covered with a
    solar blanket.)



















  • For Pool up to 25,000
    gallons

  • Dual Copper Coil
    Heat Exchanger     (95
    total feet of pipe,
    handles up to 40-45
    GPM)

  • Comes with a 24"
    long, 6" diameter
    chimney pipe, cap &
    magnetic
    thermometer.
  • Average BTU output
    90,000 to 100,000    
    (Adding wood every
    1.5 to 2.0 hours)

  • Measures 32" high x
    27" wide x 33" long
    and weighs 420 lbs.    
    (Heater Stands 5' 6"
    At Top Of Chimney
    Cap)

  • Inside of fire box
    measures 27" deep
    17.5" wide and 15"
    tall.

  • Can heat a 10,000
    gallon pool by 1.0 of a
    degree per hour with
    a good fire.

  • Painted with a Hi-
    Temp exterior use
    black paint, not
    powder coat.

  • Capable of increasing
    the water temp from
    55 to 85 degrees in 3
    days on a 15,000 to
    20,000 gallon pool.  
    (While covered with a
    solar blanket.)
















  • For Pool up to 40,000
    gallons

  • Three Layer Stainless
    steel Heat
    Exchanger     (75 total
    feet of pipe, handles
    up to 60-65 GPM)

  • Comes with a 24" long,
    8" diameter chimney
    pipe, cap & magnetic
    thermometer.

  • Average BTU output
    150,000 to 170,000    
    (Adding wood every
    1.5 to 2.0 hours)

27" wide x 33" long and
weighs 440 lbs.    (Heater
Stands 5' 6" At Top Of
Chimney Cap)

  • Inside of fire box
    measures 27" deep
    17.5" wide and 21" tall.

  • Can heat a 20,000
    gallon pool by 1.0 of a
    degree per hour with
    a good fire.

  • Painted with heavy
    duty exterior Hi-Temp
    glossy black powder
    coat paint.

  • Capable of increasing
    the water temp from
    55 to 85 degrees in 3
    days on a 20,000 to
    30,000 gallon pool
    while covered with a
    solar blanket.
All heaters are made of 10 & 12 gauge hot roll steel, with 1/4" inchthick
doors & firebrick lined fireboxes. They are fully insulated with 1.5"
inch thick fire insulation to provide maximum heat transfer, efficiency
& safety; keeping the exterior from getting excessively hot.

All heaters are tankless. Your pool pump pushes a continuous flow of
water through the heat exchanger, while the fire burns through it.
wood pool heater,
connecticut
wood pool heater,
connecticut
(Stainless)                         (Copper)                       (Stainless)
connecticut